Connector Assignment
5.8.3 Standard Assignment VMEbus P0
Pin Row f
Row e
Row d
Row c
Row b
Row a
1
GND (ETH1_MDI2_P) (ETH1_MDI2_N)
GND
(ETH1_MDI0_N) (ETH1_MDI0_P)
2
GND (ETH1_MDI1_P) (ETH1_MDI1_N)
GND
(ETH1_MDI3_N) (ETH1_MDI3_P)
3
GND
RXS2
TXS2
RXS1
TXS1
GND
4
GND
I/O201
I/O202
I/O203
I/O204
I/O205
5
GND
I/O206
I/O207
I/O208
I/O209
I/O210
6
GND
I/O211
I/O212
I/O213
I/O214
I/O215
7
GND
I/O216
I/O217
I/O218
I/O219
I/O220
8
GND
I/O221
I/O222
I/O223
I/O224
I/O225
9
GND
FPGA-XI/O41
FPGA-XI/O42
FPGA-XI/O43
FPGA-XI/O46
FPGA-XI/O47
10
GND
FPGA-XI/O38
FPGA-XI/O39
FPGA-XI/O40
FPGA-XI/O44
FPGA-XI/O45
11
GND
FPGA-XI/O35
FPGA-XI/O36
FPGA-XI/O37
FPGA-XI/O34
FPGA-XI/O33
12
GND
I/O226
I/O227
I/O228
I/O229
I/O230
13
GND
I/O231
I/O232
I/O233
I/O234
I/O235
14
GND
I/O236
I/O237
I/O238
I/O239
I/O240
15
GND
I/O241
I/O242
I/O243
I/O244
I/O245
16
GND
I/O246
I/O247
I/O248
I/O249
I/O250
17
GND
I/O251
I/O252
I/O253
I/O254
I/O255
18
GND
I/O256
I/O257
I/O258
I/O259
I/O260
19
GND
I/O261
I/O262
I/O263
I/O264
CT_VCC
95-pin I/O connector according to IEC 1076-4-101
Description of the signals of P0:
(ETH1_MDIx_P),
(ETH1_MDIx_N)
... Ethernet interface 1 (IEEE802.3) (x = 0, 1, 2, 3)
(only at VME-PMC-CPU/2-CC, otherwise these pins are not
connected)
RXSy, TXSy
... Serial interfaces 1 and 2 (y = 1, 2), physical layer RS-232
(These signals are bridged to signals of the same name of connector
X1940 in the front panel.
I/O201 ... I/O264
... I/O signals of the PMC slot 2 (J24) according to VITA 35, P4 V0-64
Note:
The signals I/O201...I/O232 can be connected via 1 kΩ-resistor to the FPGA-ports
FPGA-XI/O01... FPGA-XI/O32 (only 3.3V-tolerant). Please contact our support team.
FPGA-XI/O33...
FPGA-XI/O47
... I/O-signals directly routed to FPGA, only 3.3V-tolerant (not available
at the moment; do not connect)
do not connect
... Do not connect this pin.
-
... This pin is not connected on the board.
Page 36 of 49
Hardware Manual • Doc.-No.: V.1917.21 / Rev. 1.2
VME-PMC-CPU/2