Safety Instructions
● When working with CPCI-USB-5 follow the instructions below and read the manual carefully to protect yourself from
injury and the CPCI-USB-5 from damage.
● The device is a built-in component. It is essential to ensure that the device is mounted in a way that cannot lead to
endangering or injury of persons or damage to objects.
● The device has to be securely installed in the control cabinet before commissioning.
● Protect the CPCI-USB-5 from dust, moisture and steam.
● Protect the CPCI-USB-5 from shocks and vibrations.
● The CPCI-USB-5 may become warm during normal use. Always allow adequate ventilation around the CPCI-USB-5
and use care when handling.
● Do not operate the CPCI-USB-5 adjacent to heat sources and do not expose it to unnecessary thermal radiation.
Ensure an ambient temperature as specified in the technical data.
● Do not use damaged or defective cables to connect the CPCI-USB-5 and follow the CAN wiring hints in chapter:
"Correctly Wiring Electrically Isolated CAN Networks".
● In case of damages to the device, which might affect safety, appropriate and immediate measures must be taken, that
exclude an endangerment of persons and domestic animals and property.
● Current circuits which are connected to the device have to be sufficiently protected against hazardous voltage (SELV
according to EN 60950-1).
● The CPCI-USB-5 may only be driven by power supply current circuits, that are contact protected.
A power supply, that provides a safety extra-low voltage (SELV or PELV) according to EN 60950-1, complies with this
conditions.
Attention !
Electrostatic discharges may cause damage to electronic components.
To avoid this, please perform the steps described on page 9
before
you touch the CPCI-USB-5,
in order to discharge the static electricity from your body.
Qualified Personal
This documentation is directed exclusively towards personal qualified in control and automation engineering.
The installation and commissioning of the product may only be carried out by qualified personal, which is authorized to
put devices, systems and electric circuits into operation according to the applicable national standards of safety
engineering.
Conformity
The CPCI-USB-5 is an industrial product and meets the demands of the EU regulations and EMC standards printed in
the conformity declaration at the end of this manual.
Warning:
In a residential, commercial or light industrial environment the CPCI-USB-5 may cause radio interferences in
which case the user may be required to take adequate measures.
Intended Use
The intended use of the CPCI-USB-5 is the operation as CompactPCI module in a CompactPCI system.
The guarantee given by esd does not cover damages which result from improper use, usage not in accordance with
regulations or disregard of safety instructions and warnings.
● The CPCI-USB-5 is intended for installation in a CompactPCI system only.
● The operation of the CPCI-USB-5 in hazardous areas, or areas exposed to potentially explosive materials is not
permitted.
● The operation of the CPCI-USB-5 for medical purposes is prohibited.
Service Note
The CPCI-USB-5 does not contain any parts that require maintenance by the user. The CPCI-USB-5 does not require
any manual configuration of the hardware.
Disposal
Devices which have become defective in the long run have to be disposed in an appropriate way or have to be returned
to the manufacturer for proper disposal. Please, make a contribution to environmental protection.
Page 4 of 22
Hardware Manual • Doc. No.: I.2326.21 / Rev. 1.2
CPCI-USB-5