Safety Instructions
● When working with the CAN-PCI/402 follow the instructions below and read the manual
carefully to protect yourself from injury and the CAN-PCI/402 from damage.
● The device is a built-in component. It is essential to ensure that the device is mounted in a way
that cannot lead to endangering or injury of persons or damage to objects.
● Do not use damaged or defective cables to connect the CAN-PCI/402 and follow the CAN wiring
hints in chapter: "Correct Wiring of Electrically Isolated CAN Networks".
● In case of damages to the device, which might affect safety, appropriate and immediate
measures must be taken, that exclude an endangerment of persons and domestic animals and
property.
● Current circuits which are connected to the device have to be sufficiently protected against
hazardous voltage (SELV according to EN 60950-1).
● The CAN-PCI/402 may only be driven by power supply current circuits, that are contact
protected. A power supply, that provides a safety extra-low voltage (SELV) according to EN
60950-1, complies with this conditions.
● The device has to be securely installed in the control cabinet before commissioning.
● Protect the CAN-PCI/402 from dust, moisture and steam.
● Protect the CAN-PCI/402 from shocks and vibrations.
● The CAN-PCI/402 may become warm during normal use. Always allow adequate ventilation
around the CAN-PCI/402 and use care when handling.
● Do not operate the CAN-PCI/402 adjacent to heat sources and do not expose it to unnecessary
thermal radiation. Ensure an ambient temperature as specified in the technical data.
DANGER
Hazardous Voltage -
Risk of electric shock
due to unintentional contact with
uninsulated live parts with high voltages inside of the system into which the CAN-PCI/402
is to be integrated.
→ Disconnect all hazardous voltages (mains voltage) before opening the system.
→ Ensure the absence of voltage before starting any electrical work
NOTICE
Electrostatic discharges may cause damage to electronic components.
→
→
To avoid this, please discharge the static electricity from your body
before
you touch
the CAN-PCI/402.
Furthermore, you should prevent your clothes from touching the CAN-PCI/402,
because your clothes might be electrostatically charged as well.
Qualified Personnel
This documentation is directed exclusively towards personnel qualified in control and automation
engineering.
The installation and commissioning of the product may only be carried out by qualified personnel,
which is authorized to put devices, systems and electric circuits into operation according to the
applicable national standards of safety engineering.
Conformity
The CAN-PCI/402 is an industrial product and meets the demands of the EU regulations and EMC
standards printed in the conformity declaration at the end of this manual.
Warning:
In a residential, commercial or light industrial environment the CAN-PCI/402 may cause
radio interferences in which case the user may be required to take adequate measures.
The CAN-PCI/402 is a sub-assembly intended for incorporation into an apparatus by a manufacturer.
The manufacturer of the final system must decide, whether additional EMC or EMI protection
requirements are necessary.
CAN-PCI/402
Hardware Manual • Doc. No.: C.2049.21 / Rev. 1.5
Page 5 of 43