Escort PASPORT Max, Руководство пользователя

Страница: 10 / 28

10
Display Brightness
PASSPORT Max’s display brightness is automatically adjusted to suit ambient lighting conditions in your
car. (The light sensor is located inside the controller, so the display may dim momentarily when you
access the buttons.) If you prefer, you can press the BRT button to set a fixed brightness level:
Auto
Automatically adjusts brightness (factory setting)
Dark Dark mode
Minimum Minimum brightness
Medium Medium brightness
Maximum Maximum brightness
Note: If you select Dark mode, the display will not provide any indication that it is on. Therefore,
only audible alerts will notify you of detected signals.
Speed Display
PASSPORT Max displays your current speed just to the right of the Over-Speed Alert setting (or posted
speed limit for your current location, if connect to ESCORT Live). If you prefer, you can turn off the speed
display feature (see Settings & Preferences section for details). If speed display is OFF, PASSPORT Max
will simply display your battery voltage in this location.
Speed display ON: Current speed Speed display OFF: Battery voltage
Radar Sensitivity
The SEN button allows you to select your preferred radar sensitivity: Highway, Auto or Auto No X. In
general, ESCORT recommends Auto for everyday driving.
Highway
In this setting, PASSPORT Max will detect all radar signals on all bands at maximum range.
Auto
In this setting, PASSPORT Max will continuously analyze all incoming signals and intelligently adjust the
sensitivity circuits, providing long-range warning with minimal false alarms.
Auto No X
Auto No X works the same as Auto mode; however, X band is completely turned off.
Warning: Do not use PASSPORT Max in Auto No X unless you are absolutely certain that there
are no traffic radar guns using X band in your area.
TrueLock/Locking Out False Alerts
PASSPORT Max is equipped with a TrueLock GPS Filter to lock out and store in its memory false alerts. To
lock out a false alert (X band, K band or laser only), press the MUTE button on the detector or the
SmartCord three times during an alert. Pressing the first time will silence the audio. Pressing a second