ESCO Technologies ETS-Lindgren EMControl 7006-001, Руководство пользователя

Страница: 66 / 91

66 EMControl Command Set ets-lindgren.com
SS#
Description: Sets a preset speed setting for a variable speed device.
Devices: Turntables, towers
Syntax: SS# <speed>

# : A value from 1
–8 to select the preset speed register to set.
Note: There can be no white space between the command and the
register number. However, there must be white space between the
register number and the speed value.

<speed> : Value from 0
–255 representing the desired speed
setting for the specified speed selection. A value of 0
represents the minimum available speed of the device, while a
value of 255 represents the maximum. The actual speed of
the device is given approximately by the formula:
Actual Speed = <speed> (MaxSpeed
– MinSpeed) / 255 + MinSpeed
Response: OK , or an error (error number)
Example:

Write sdSS2 127\n : Set speed 2 to half speed

Write sdSS5 63\n : Set speed 5 to quarter speed
See Also: S# , S? , SS#?