ESCO Technologies ETS-Lindgren EMControl 7006-001, Руководство пользователя

Страница: 26 / 91

26 Operation ets-lindgren.com
C
HANGE
C
URRENT
P
OSITION
From the EMControl screen press the button
displaying the current position for the connected
turntable or tower. When the Settings screen
displays, enter the new number at the keypad,
and then press Set Current to set this value as
the current position.
C
HANGE
S
PEED
Speed is expressed as a percentage of
maximum speed; there are eight speeds to
choose from. To change the speed, from the
EMControl screen press Speed and then select
the required speed from the Speeds screen.
The eight preset speeds available are
configured by using the Speed Presets button in
the Configuration screen. For information on
Speed Presets, see page 29.
EMControl Speeds screen