ESCO Technologies ETS-LINDGREN BiConiLog 3142E, Руководство пользователя

Страница: 14 / 27

14
Before connecting any
components, follow
the safety information
in the ETS-Lindgren
Product Information
Bulletin included with
your shipment.
The Model 3142E
antenna is a precision
measurement device.
Handle with care.
Note :
Photos of bowtie
elements used in this
section may differ from
the bowtie elements for
your Model 3142E; the
assembly procedure is
the same for both.
1. Thread the antenna feed
or receiving cable through
the center of the boom
so that the antenna
connector emerges a few
inches out of the clamp
end of the boom.
2. Attach the cable to the
Type N connector at the
end of the stinger.
3. Slide the cable and
stinger into the clamp
on the boom, carefully
guiding the cable out the
other end.
4. When you reach the back
of the balun box, align it
with the boom receptacle,
and then slide the smaller
portion of the balun box
into the boom. This will
prevent rotation of the
antenna unless the boom
is being polarized.