ESCO Technologies ETS LINDGREN 2302-001, Руководство пользователя

Страница: 9 / 16

9 8
MAINTENANCE
Before installing any components, follow the safety information in the ETS-
Lindgren Product Information Bulletin included with your shipment. If you have
any questions concerning maintenance, contact ETS-Lindgren Customer Service.
Maintenance Recommendations
• Periodically review absorber and cables for wear
• Place positioner away from busy traffic areas and walkways
• Level out antenna when relocating
Replacement Parts
Following are the part numbers for ordering replacement parts for the 2302
positioner:
Replacement Parts
Part Description Part Number
25mm screws 930799
2302-001
Antenna (Horn) 1722996
Cables 1724650
Absorber Panels 1723115, 1723116, 1723144
2302-002
Antenna (Horn) 1722996
Absorber Panels 1723115, 1723116, 1739013
Laser 1701921
2302-003
Antenna 3164-08
Absorber Panels 1742668, 1742567, 1742669
Laser 1701921
Service Procedures
For the steps to return a system or system component to ETS-Lindgren for
service, see the Product Information Bulletin included with your shipment.
Safety Precautions Safety Precautions
Keep eyes clear from lasers. Avoid leaning or hanging from column to prevent Keep eyes clear from lasers. Avoid leaning or hanging from column to prevent
damage to device and/or person.
damage to device and/or person.
Disconnect the power
before proceeding
with recommended
maintenance. Do
not perform any
maintenance while the
positioner is operating.
High Voltage:
Unsafe practice could
result in severe personal
injury or death.
Before assembling,
installing, or connecting
any components, follow
the safety information
in the ETS-Lindgren
Product Information
Bulletin included with
your shipment.
Note:
Contact ETS-Lindgren
Technical Support
for assistance with
replacement parts.