Escient Vision VS & VC User’s Guide
Version: M51003-02A3
32
Specifications
Video Specifications
Analog Video
• Composite and S-Video (Interlaced)
• Component YPbPr (Interlaced and Progressive)
• Resolution: 480 (NTSC), 575 (PAL)
• NTSC-M (North America, Taiwan),
• NTSC-J (Japan),
• PAL-B, D, G, H, I (Europe, Asia),
• PAL-M (Brazil), PAL-N (Uruguay, Paraguay)
• PAL-Nc (Argentina).Audio Specifications
• Macrovision 7.1.L1 or Macrovision 1.2 AGC with 525p and 625p progressive
scan output
Digital Video
• DVI and HDMI 1.2a compliant
• HDMI 1.3 switching
• Scalable output bandwidth: 25-165 megapixels
• HDCP 1.1 compliant
• HDMI HD Audio
• Resolution: from 480p to 1080p
Audio Specifications
• Intel High Definition Audio Specification Rev.1.0 Compliant
• 44.1K/48K/96K/192KHz DAC Independent Sample Rate
• 48K/192KHz Independent Sample Rate
• DAC: 24-bit, 192KHz Samples - 100dB S/N Ratio
• ADC: 24-bit, 192KHz Samples - 95dB S/N Ratio
• 8-Channels of DAC Support 16/20/24-bit PCM Format for 7.1 Audio Solution
• 16/20/24 bit S/PDIF TX Supports 24-bit, 44.1K/48K/96KHz Samples
• 16/20/24 bit S/PDIF RX Supports 24-bit, 44.1K/48K/96KHz Samples
Physical Specifications
• VS Series = 17.375 inches (W) x 4.625 inches (H) x 11.875 inches (D)
• VS Series = 43.8 cm (W) x 12.2 cm (H) x 28.6 cm (D)
• VC Series = 15.313 inches (W) x 2.25 inches (H) x 13.25 inches (D)
• VC Series = 39 cm (H) x 6.8 cm (H) x 34.8 cm (D)
Power Consumption
• VS Series: 60W max
• VC Series: 35W max
• VX Series: 68W max
3rd Party Certifications
• FCC: US Part 15, Class B
• NTSC Video Output: NTSC RS-170A
• cETL Listing
• Conforms to: UL STD 6500-2000
• Certified to: CAN/CSA STD E60065-00
• CE
FCC Part 15, Subpart B
Class B
Note:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc
-
tions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television recep
-
tion, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio TV technician for help.
• Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.
