FIREBALL REMOTE CONTROL GUIDE WD049-1-2
2/23/2007
6640 Intech Blvd. Suite 250 Indianapolis, IN 46278 317.616.6789 phone 317.616.6790 fax www.escient.com
Press the CBL source button.
Press & Hold the “Set” button on the remote until the LED flashes twice.
Enter the CBL reset code which corresponds to the FB source being reset:
o
“1370”
for
FB1
o
“1371”
for
FB2
o
“1372”
for
FB3
o
“1373”
for
FB4
The LED will flash twice indicating the code was accepted.
Programming the Universal Source Buttons
Use the following steps to program the AUX, DVD, TV, and RCV source buttons to control
other devices. The following table indicates which device types can be programmed on which
source buttons:
Source Button
Device Assignment
TV TV
CBL NOT
AVAILABLE
RCV
Amplifier, Tuner, Phono, Misc. Audio, CD, Home Automation, MD
DVD
VCR, Audio Cassette, DVD, LDP, DAT, PVR
Locate the 4 digit device code for the device you want to control in Appendix A.
Press the source button to be programmed.
Press & Hold the “Code Set” button on the remote until the LED flashes twice.
Enter the 4 digit code using the remote’s numeric keypad. The LED will flash twice
indicating the code was accepted.
Note: If the LED does a single long flash then the entered code was not valid for that source
button.
