Eschenbach 1659-16, Руководство по эксплуатации

Страница: 13 / 72

- 13 -
EN
Adapting the zoom
To zoom in, press A. To zoom out, press B. The currently se-
lected zoom factor is shown briefly in the display.
Dynamic Line Scrolling
To use Dynamic Line Scrolling, press and hold the OK but-
ton F briefly. Then you can select the desired reading mode
using the arrow keys < and > E. Once the desired zoom factor
has been set, you can use the arrows to move the displayed
section horizontally or vertically without having to move the
reading material itself. If you press the arrow buttons at the
end/beginning of the image selection for 2 seconds, the im-
age selection jumps to the other end/beginning. This makes it
much easier to read text.
Overview function
If you would like to get an overview of the reading material, press button C. The mag-
nification changes to 1.3 ×. By pressing the button C again, the previously set magni-
fication is selected again.
False color display
To change false colors, press the D button until the desired false color is displayed.
Channels
A switch for switching over the channels is located in the battery housing. However, this
is only necessary if two devices are being used next to each other. You can set the rele-
vant channel in the menu under “Remote control“ (see page 37).
The channel selected on the remote control and in the menu must be identical. Only
then can the remote control be used. Channel 1 is used by default.