ESCAPE FITNESS
MARS USER MANUAL | MAY 2022
SAFETY.
For your safety, please read the following instruction before you use the product. Serious injury or property loss may be caused by improper operations. Do not try to
repair or modify the product.
WARNING.
Ensure that the mains electricity supply includes an earth connection.
Ensure that, if the MARS screen is mounted on a RACK5 or Octagon that it is done so in line with the installation instructions for the particular mount used.
Disconnect the product from power supply immediately if major failures occurs
such as Smoke, peculiar smell or abnormal sound is discharged from the product or in
the unlikely event that you experience an electric shock from the equipment.
If you are unable to get the system started
and it is unable to display any activity on the screen then please ensure that the Mars screen has been attached to mains
power. Please follow the quick start guide instructions at escapefitness.com/user-guides/mars-screen or follow the link in the QR code attached to the front of the screen..
Do not drop liquid, conductive or any foreign material into the product.
Power off immediately if this occurs and contact qualified staff for solutions.
Do not cover up any ventilation holes.
Overheated components can cause fire, damage the product or shorten the service life.
Do not damage, change, wind, bend heat or drag the power cable forcibly. Do not put weights (such as the product itself) on the power cable. Do not drag the cable forcibly
when you pull out the power plug. If the power cable is damaged, please contact your local distributor to repair or replace it. The power cable should be attached so that it
is not pulled tight against the mains cable cover under any circumstances. Do not touch the power cable with wet hands this might cause an electric shock.
Make sure that the MARS screen is mounted securely
, either using a 3rd party wall mount on a wall known to be substantial enough for the weight of the screen or on a
RACK5 or Octagon using the approved mounts.
Do not open the cover or change the product.
High voltage components are installed in the product that can be dangerous even when the screen is turned off. It is
dangerous to open the cover and electric shock or other dangerous situations may occur. The product is not serviceable by the user and if a fault develops the screen
should be returned to the supplier.
If you need to move the screen it should be unmounted and move carefully before re-mounting.
All connections should be removed before attempting to move
the screen.
