PVR Series Product Manual
Website: www.escam.cn Support email: [email protected]
Click
【
search
】
, you can search the devices in LAN
Button description
：
Refresh current device list
Modify IP (Only for device added by IP), When you choose UID, this column is gray
Click this box to add manually, when the IP camera is not in the same LAN with PVR,
it can
’
t be searched, then you need to add the camera by UID manually.
There
’
re 3 protocol, when you add, please choose the corresponding protocol.
P6S--- Private PVR and camera
’s local protocol
ZWP2P--- Private PVR and camera
’s WAN protocol
When this is checked, PVR can only search the cameras in LAN via UID, if the
camera is without UID, it can
’
t be shown
When this is checked, PVR can only search the cameras in LAN by IP address
When this is checked, the added devices won
’
t be shown, after it is cancelled, the
added devices can be searched again and added
Add all the searched devices
Only add the checked devices
（
The white box before series number
）
After the device is added, you can preview
If the camera’s password or other information is not correct, then network will be off (for example: Channel CAM01,
CAM02)
The channel with camera in normal status will be shown, if HDD is installed, then red dot shown on the top right
corner means it
’s recording
（
For example: Channel CAM03
）
If the channel shows PVR, that means no camera is added at this channel
（
For example: channel CAM04-CAM08
）。
