H E A D B E A M T O - A - F R A M E - A S S E M B L Y
5/16" x 5" LAG SCREW
5/16" FLAT WASHER
3/8"-16 x 6.5" HEX BOLT
3/8" FLAT WASHER
3/8" NYLON LOCKNUT
3/8" FLAT WASHER
PG-46-0003
U-SHAPED BRACKET
PG-HW-M003
1. Place HEAD BEAM into the U-Shaped Bracket and line up
to the two single holes
ANGLE BRACKET
and attach as shown.
in the end of HEAD BEAM
2. When
is sitting flat in the U-Shaped Bracket, attach with
from each
HEAD BEAM
5/16" x 5" LAG SCREW
(Prop up the end of
6" for it to lay flat in the U-Shaped Bracket)
Head Beam
side as shown.
171" 3 POSITION
HEAD BEAM
ANGLE BRACKET
18
