ESCALADE LS2005, Руководство собрания владельцев и инструкции по эксплуатации

Страница: 11 / 11

11
7. If there is no preset time target, each profile unit will move forward in every 0.5 km of the
training distance.
Extra Training program :
This is a special feature on the monitor. The monitor has three additional
training plugs in red, yellow and green colors attached to the monitor console. You may use
one of them to choose specified heart rate training program to improve your training. Here
below is the specification content of these three additional programs :
Green : Beginning
Yellow : Intermediate
Red : Advanced
Once you connect any color of the plug, the monitor will reset automatically and start the
training to the program specified directly from zero. Those training will be not kept to the
monitor memory that any user can use it any time.
Note
1. The monitor will not save your training and preset data after you pressing
RESET
button for 2 seconds.
2. When you have preset function target or have been training for a while, if you change to another
Training mode, all previous data will be kept and keep counting up or counting down when you start
training in different mode.
3. The monitor display will switch off automatically if you stop training and pressing any button for 4
minute. You may wake up the monitor display by pressing any button or start training directly.
4. After the monitor display is switch off, all previous function datas and training datas will be kept. You
may keep training after awake the monitor display up, all function datas will keep counting up or
down from previous data.
5. The monitor user initially set is U0 after production. For the first time use, you may either choose using a
user U1 ~ U4 for training or use U0 for training.
6. When you have preset a target function data, once the target is achieved, the monitor will stop. You
may either press START/STOP button to have a new training. In this case, the function that is count
down to zero will start counting down again from the last preset target. Other functions will keep
counting up or down from previous data.
7. There is one information indicates monitor failures :
E-2 When the monitor appears this information, it means the monitor and control board connection is
failed. After the failure is fixed, this information will disapear.
8. Power requirement: AC adaptor(Output : DC9V, 500mA)