Manual
of
Sensorless Brushless Motor Speed Controller
Ver HW-01-081027.1
- 1 -
Size
Li-ion
Li-poly
NiMH
NiCd
L*W*H
6A
Pentium-6
6A
8A
Linear
5V/0.8
2
5-6
Available
N/A
6g
24*12*6
10A
Pentium-10
10A
12A
Linear
5V/1A
2-4
5-12
Available
N/A
9g
27*17*6
Pentium-12
12A
15A
Linear
5V/1A
2-4
5-12
Available
N/A
12g
32*24*8
Pentium-12E
12A
15A
Linear
5V/2A
2-4
5-12
Available
N/A
13g
32*24*10
18A
Pentium-18
18A
22A
Linear
5V/2A
2-4
5-12
Available
N/A
19g
45*24*11
Pentium-25
25A
35A
Linear
5V/2A
2-4
5-12
Available
N/A
22g
45*24*11
Pentium-25-OPTO
25A
35A
N/A
N/A
2-4
5-12
Available
N/A
21g
45*24*11
Pentium-30
30A
40A
Linear
5V/2A
2-4
5-12
Available
N/A
25g
45*24*11
Pentium-30A + UBEC
30A
40A
Switch
5V/2A
2-4
5-12
Available
N/A
32g
45*24*11(ESC)
Pentium-40
40A
55A
Switch
5V/3A
2-6
5-18
Available
N/A
35g
55*28*12
Pentium-40-OPTO
40A
55A
N/A
N/A
2-6
5-18
Available
N/A
32g
55*28*11
Pentium-60
60A
80A
Switch
5V/3A
2-6
5-18
Available
N/A
60g
70*31*14
Pentium-60-OPTO
60A
80A
N/A
N/A
2-6
5-18
Available
N/A
56g
70*31*13
Pentium-80
80A
100A
Switch
5V/3A
2-6
5-18
Available
N/A
62g
70*31*14
Pentium-80-OPTO
80A
100A
N/A
N/A
2-6
5-18
Available
N/A
58g
70*31*13
100A
Pentium-100
100A
120A
N/A
N/A
2-6
5-18
Available
N/A
120g
78*55*15
Size
Li-ion
Li-poly
NiMH
NiCd
L*W*H
18A
Guard-18
18A
22A
Linear
5V/2A
2-4
5-12
Available
Available
24g
45*26*11
25A
Guard-25
25A
35A
Linear
5V/2A
2-4
5-12
Available
Available
27g
45*26*12
30A
Guard-30
30A
40A
Linear
5V/2A
2-4
5-12
Available
Available
29g
45*26*12
40A
Guard-40
40A
55A
Switch
5V/3A
2-6
5-18
Available
Available
40g
55*28*15
60A
Guard-60
60A
80A
Switch
5V/3A
2-6
5-18
Available
Available
65g
70*31*14
80A
Guard-80
80A
100A
Switch
5V/3A
2-6
5-18
Available
Available
67g
70*31*14
Pentium Series
Guard Series
Weight
Burst
Current
(>10s)
BEC
Mode
BEC
Output
Battery Cell
User
Programm-
abl e
Balance
Discharge
Protection
60A
Class
Model
Cont.
Current
80A
12A
40A
BEC
Mode
(
Note1
)
BEC
Output
Class
Model
Cont.
Current
Burst
Current
(>10s)
25A
30A
Balance
Discharge
Protection
Weight
Battery Cell
User
Programm-
abl e
Thanks for purchasing our
Electronic Speed Controller (ESC). High power system for RC model can be very dangerous, so we
strongly suggest you read this manual carefully. In that we have no control over the correct use, installation, application, or
maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use
of the product. Any claims arising from the operating, failure or malfunctioning etc. will be denied. We assume no liability for
personal injury, property damage or consequential damages resulting from our product or our workmanship. As far as is legally
permitted, the obligation to compensation is limited to the invoice amount of the affected product.
Features:
Balance Discharge Monitoring and Protection (BDMP) Design for lithium battery pack.
This innovative new system provides
real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs. Since each cell is monitored
and protected by the ESC, you can expect an even longer service life from your battery packs as you fly with increased confidence.
(Remark: This function is ONLY available for the “Guard” series ESC)
Compatible with Lithium and Nickel battery types. (Lithium-Ion / Lithium-Polymer or Nickel Metal Hydride / Nickel Cadmium)
Extreme low output resistance, super current endurance.
Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopter.
Throttle range can be configured to be compatible with all transmitters currently available on market.
Smooth, linear and precise throttle response.
Separate
voltage regulator IC for microprocessor (except Pentium-6A and Pentium-10A), providing good anti-jamming capability.
Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
Our
pocket-sized
Program Card
can be purchased separately for extremely easily programming the ESC at the field.
With a program card, you can activate the music playing function of the ESC, and totally there are 15 songs can be selected.
Specifications:
Note1
: BEC means the “Battery Elimination Circuit”. It is a DC-DC voltage regulator to supplies the receiver and other
equipments from the main battery pack. With the build-in BEC of an ESC, the receiver needn’t to be supplied with an additional
battery pack.
IMPORTANT! The ESC named “xxx-xxx-OPTO” hasn’t a built-in BEC, an UBEC (Ultimate-BEC) or an individual battery pack
should be used to power the receiver. And an individual battery pack is needed to power the program card when setting the
programmable value of such ESCs, please read the user manual of program card for reference.
5S-6S Li-Poly
4
BEC Output Capability
Standard micro servos (Max.)
5
4
2S Li-Poly
3S Li-P oly
2S - 4S Li-Poly
5
Linear Mode BEC(5V/2A)
3
2
4S Li-Poly
5S Li-Pol y
Switch Mode BEC(5V/3A)
