ESC G33T-M2, Руководство пользователя

Страница: 35 / 52

29
Using BIOS
Limit CPUID MaxVal (Disabled)
This item can support Prescott CPUs for old OS. Users please note that under NT
4.0, it must be set “Enabled”, while under WinXP, it must be set “Disabled”
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
Thermal Management (Enabled/TM1/TM2)
This item displays CPU’s temperature and enables you to set a safe temperature to
Prescott CPU.
Enhanced Halt (C1E) (Enabled)
This item enables or disables enhanced halt (C1E).
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Intel EIST (Enabled)
This item allows users to enable or disable the EIST (
Enhanced Intel SpeedStep
Technology).
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Intel Virtualization Tech. (Enabled)
This item allows users to enable or disable the Intel Virtulization technology.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Advanced Setup
Thermal Management Enabled
Thermal Management TM1/TM2
Limit CPUID MaxVal Disabled
Enhances Halt (C1E) Enabled
Intel XD Bit Disabled
Intel EIST Enabled
Intel Virtualization Tech. Enabled
Quick Power on Self Test
Enabled
Boot Up Numlock Status On
APIC Mode Enabled
1st Boot Device Hard Drive
2nd Boot Device CD/DVD
3rd Boot Device 1st FLOPPY DRIVE
Removable Drives Press Enter
For the processor its
CPUTD belows 0F14h.
TM2 only can be enable
under below settings.
1.Freq.>=3.6GHz FSB800
2.Freq.>=2.8GHz FSB533
Help Item
f
F10: Save ESC: Exit +/-/: Value Enter : Select
F9: Optimized Defaults F1:General Help
: Move
mnlk