3.165C
6.5”/165 mm
Convertible Speaker
Installation Manual
esbcar.com
TECHNICAL SPECIFICATIONS
• Power handling:
240 W peak, 120 W continuous
• Frequency response:
65 Hz - 25 KHz +/- 3dB
• Sensitivity:
88.5 dB SPL 1W/1m
• Overall diameter: 165 mm
Total Height: 82 mm
Mounting depth: 64 mm
Mounting hole: 145 mm
MAIN FEATURES
• FEA motor optimized
• 25 mm copper/aluminum voice coil
• High temperature aluminum former
• High-grade ferrite magnet (woofer)
• N42 neodymium magnet (tweeter)
• Axial forced coil ventilation
• Fiber reinforced paper cone (woofer)
• Hi module silk dome (tweeter)
• Oversized single wave rubber
suspension (woofer)
• Poly cotton spider (woofer)
• Computer designed ABS frame
• Motor metal part CNC machined
NOTE
: Make sure that your mounting location will not cause damage to the components of your vehicle.
Check for airbag system location, speaker can’t be located over or close it. Never play this component
without crossover, especially with high powers, this can damage it. Never play the system with amplifier
in clipping or high distortion level. If use a passive crossover, use a dedicated crossover system, don’t
use a generic passive crossover, these are not designed for this speaker impedance and the indicated
cut-off frequency may not be true.
