esatto.house
11
Temperature Control
• Your fridge has one control for regulating the temperature. The temperature control is located at the rear,
near the compressor.
• Depending on your room’s ambient temperature, you may need to adjust the temperature setting to
achieve your desired temperature.
• The number on the thermostat dial does not directly represent the temperature. Instead, the larger the
number is, the lower the freezer interior temperature will be.
→ Dial position 1–2 will set your freezer to approximately -12°C
→ Dial position 3–4 will set your freezer to approximately -15°C
→ Dial position 5–6 will set it to approximately -20°C.
IMPORTANT:
If the unit is unplugged, lost power, or turned off, you must wait 3 to 5 minutes before
restarting the unit.
If you choose to change the thermostat setting, adjust the thermostat control by one numerical increment at
a time. Allow several hours for temperature to stabilize between adjustments.
Your first use, you should set the thermostat to the maximum position of 6 for the first 24 to 48 hours, after
which you can set it to the setting that best suites your needs.
Using for the First Time
When you install your appliance, set the thermostat knob to position 6 for the first 24–48 hours, after which
you can set it to the level that best suites your needs. It is the best to wait 24 hours before adding food.
IMPORTANT:
Once the unit has started, continuous operation is recommended. Please try and avoid turning
the unit off and on as this may affect the service life.
Noise From Your Bar Freezer
• You may notice that your bar fridge makes some unusual noises from time to time. Most of these are
perfectly normal, but you should be aware of them!
• These noises are caused by the circulation of the refrigerant liquid in the cooling system. This is not a fault
and will not affect the performance of your unit and is common with all modern fridges.
Using Your Upright freezer
