Esatto EDW6CS, Руководство пользователя

Страница: 18 / 24

Page:
18
User Manual:
CARING FOR THE DISHWASHER
→ The control panel of the dishwasher can be cleaned using a slightly
dampened cloth. After cleaning, ensure it is dryed thoroughly.
→ To clean the internal edge of the door, you should only use a soft, damp
cloth with warm water. Avoid using any spray cleaners as these can
penetrate into the door lock and electrical components.
CLEANING THE SPRAY ARMS
→ It is necessary to clean the spray arms regularly for hard water chemicals
will clog the spray arm jets and bearings.
→ To remove the upper spray arm, hold the nut and rotate the arm
clockwise to remove.
→ To remove the lower spray arm, pull the spray arm upwards (as per the
diagram below).
→ Wash the arms in warm soapy water and use a brush to clean the jets.
Replace the spray arms after rinsing thoroughly.
GENERAL CARE INSTRUCTIONS FOR YOUR DISHWASHER
→ After every wash, leave the door slightly open so that moisture and
odours are not trapped inside.
→ Before performing maintenance or cleaning, always switch off at the
power outlet and remove the plug.
→ To clean the exterior and rubber door seals of the dishwasher, never use
solvents or abrasive cleaning products. Warm soapy water should always
be sufficient, or for stubborn stains only use specialty cleaning products
specifically made for dishwashers.
→ When your dishwasher won't be used for a long period of time, it is
recommended that you run a wash cycle with the dishwasher empty and
then leave the dishwasher door slightly open. Also unplug the dishwasher
from the power socket.
→ When moving the appliance, always try to ensure it is kept in the vertical
position. If absolutely necessary, it can be positioned on it's back.
→ One of the factors that can cause odours to form is residual food that
remains trapped in the seals. Periodic cleaning with a soft damp cloth (as
described above) will prevent this from occuring