WARRIOR TECH:
,
the light state when the welding arc stops.
How to set the shade:
On the
WARRIOR TECH
set the shade by turning the knob on the outside of
the helmet (pos. 1).
The most suitable setting can be found on the Chart in this brochure or
chosen using your experience. This setting can also be made manually during
the welding process.
Turning clockwise = darker
Turning anti clockwise = clearer
Turn the sensitivity knob clockwise to the max. setting (pos. 2). Depending
state.
surrounding light conditions).
Range of use for the WARRIOR TECH
All arc welding applications with the exception of TIG<5A and pulse inverter.
Available shade - 9-13 (pos.1).
Setting the delay
The clearing delay can be adjusted manually by turning the delay knob (pos. 3) between a fast clear (0.1 sec) fully anti-clockwise and a
slow clear (1.0 sec) fully clockwise.
Spare parts for WARRIOR TECH Welding Helmets
1
2
3
Items without a part number are not available as spare parts
Filter Testing:
Check outer protection lens is clean and can be seen through.
Ensure the the sensors are covered in any way and are clean.
Once these checks have been carried out you can now test the ADF.
Turn the outside shade knob to the darkest setting (shade 13) and set the sensitivity to the highest setting (turning clockwise). Now point the sensor towards a light source such as an
overhead light, lamp etc. The ADF should now switch to the dark state (please note if the ADF is stored in a dark area away from light it may need to be left out in strong light for 20
functioning correctly, simply turn the shade knob anti-clockwise. By doing this, the shade should get lighter. If the shade does not appear to alter then you have an issue with the shade
variation.
delay setting to the minimum and repeat the process, the time taken to return to the clear state should be 0.1 second. If the ADF does not react in this way then there is an issue with
the delay function.
then there is an issue with the light sensors.
If any of the functions fail during test or in use then please do not use the ADF and contact your local distributor.
Part No. Description
0700000400
0700000401
0700000415
0700000244
0700000010
0700000416
0700000418
0700000419
Warrior Tech 9-13 Black
Warrior Tech 9-13 Yellow
Esab Head Gear
Sweat band for Warrior Tech
Front cover lens
Inside cover lens
Warrior Tech ADF cradle
ESAB ADF 9-13
Warrior Tech Lens retainer with screws
No.
1
1
2
3
4
5
6
7
8