6.
To mount cylinders on completed assembly:
Slide at least the second link of each chain (678944)
into the center slot of the cylinder support.
When you put the cylinders in place, pull the chain tightly
around each cylinder and slide a chain link into the outer
slot of the cylinder support. Be sure to pull the link down
firmly into each slot to secure the chain so that there is
little slack of the chain about the cylinder. DO NOT just
"loop" a link over the end of the support.
Cylinder support
assembly screws
Handle
Floor of Truck is flush
with lower panel of
Power Source.
Cable Strain Relief Bar
F15-592-B
03 / 2003
Figure 3
Figure 4
Assembly Screws on
Left Side not visible.
READ & UNDERSTAND THIS LABEL
PROTECT YOURSELF AND OTHERS
LIRE & COMPRENDE CETTE ETIQUETTE
VOUS PROTEGER ET LES AUTRES
Lifting eye to be used for lifting
power source ONLY.
Do NOT use when additional accessories
are attached to power source.
L’oeil d’ascenseur etre utilise
pour la source de pouver seulement.
sont attachesa la source de pouvoir.
PRUDENCE
P/N 99512240-C 3/22/02