5 UNPACKING / ASSEMBLY
0-5596
- 19 -
© ESAB AB 2021
Battery charge
1.
Connect the charger to the mains.
2.
Connect the battery to the charger.
3.
The state of charge is displayed via a red LED on the mains charger.
4.
Once the charge is finished, the floating charge becomes active: the red LED switches
OFF and a green LED switches ON.
5.
Remove the battery and disconnect the charger from the mains (do not keep the
charger plugged to the mains if it is not in use).
5.4
Installing the blower unit on the belt
1.
Remove the belt’s release buckle.
2.
Remove the fastening belt from the waist connector’s two belt loops.
3.
Make the fastening belt pass through the blower unit’s two belt loops.
4.
Position the Velcro® between the two loops.
