-- 6 --
bm38d1ea
WARNING!
This product is intended for industrial use. In a domestic environment this product may cause radio
interference. It is the user’s responsibility to take adequate precautions.
WARNING!
When welding in an environment with increased electrical danger, only power sources intended
for this environment may be used. These power sources are marked with the symbol
.
5.1
Lifting instructions
Order number for lifting eyelet can be found on page
16
.
Note!
If another mounting device is used, this should be insulated from the wire feed
unit.
6
OPERATION
General safety regulations for the handling of the equipment can be found on
page
3
. Read through before you start using the equipment!
WARNING!
Assure that the side panels are closed during operation.
To prevent the reel from sliding off the hub: Lock the reel in place by
turning the red knob as shown on the warning label attached next to
the hub.
WARNING!
GB
