ESAB Origo Feed 304 M12 Series, Руководство по обслуживанию

Страница: 5 / 40

TECHNICAL DATA
0740 800 144 - 5 - © ESAB AB 2018
TECHNICAL DATA
Feed 304 Feed 484
Mains voltage 42 V, 50–60 Hz 42 V, 50–60 Hz
Power requirement 336 VA 378 VA
Motor current I
max
8 A 9 A
Control panel M12, settings data
Wire feed speed 1.9–25.0 m/min
(6.2–82.0 ft/min) 1.9–25.0 m/min
(6.2–82.0 ft/min)
Burnback time 0–0.5 s 0–0.5 s
Creep start OFF or ON OFF or ON
2-/4-stroke 2-stroke or 4-stroke 2-stroke or 4-stroke
Control panel M13, settings data
Wire feed speed 1.9–25.0 m/min
(6.2–82.0 ft/min) 1.9–25.0 m/min
(6.2–82.0 ft/min)
Burnback time 0–0.5 s 0–0.5 s
Crater filling time 0–5.1 s 0–5.1 s
Creep start OFF or ON OFF or ON
2-/4-stroke 2-stroke or 4-stroke 2-stroke or 4-stroke
Torch connection EURO EURO
Max. diameter wire bobbin 300 mm / *440 mm (11.8 in. /
*17.3 in.) 300 mm / *440 mm (11.8 in. /
*17.3 in.)
Wire dimension 0.6–1.6 mm (0.02–0.06 in.) 0.6–2.4 mm (0.02–0.09 in.)
Weight
Basic version 11.5 kg (25.3 lb) 14.5 kg (32.0 lb)
With sealed bobbin holder 15.0 kg (33.0 lb) 19.0 kg (41.9 lb)
Dimensions (l × w × h)
Basic version 380 × 275 × 400 mm
(15.0 × 10.8 × 15.7 in.) 380 × 275 × 400 mm
(15.0 × 10.8 × 15.7 in.)
With sealed bobbin holder 690 × 275 × 420 mm
(27.2 × 10.8 × 16.5 in.) 690 × 275 × 420 mm
(27.2 × 10.8 × 16.5 in.)
Operating temperature -10 to +40 °C (14 to 104 °F) -10 to +40 °C (14 to 104 °F)
Shielding gas All types intended for
MIG/MAG welding All types intended for
MIG/MAG welding
max pressure 0.5 MPa (5 bar) 0.5 MPa (5 bar)
Coolant ESAB ready mixed coolant ESAB ready mixed coolant
max pressure 0.5 MPa (5 bar) 0.5 MPa (5 bar)
Maximum permissible load at
60% duty cycle 630 A 630 A
Enclosure class IP23 IP23
With wire bobbin *440 mm IP2X IP2X
*Accessories can be found in the Instruction manual in the chapter "ACCESSORIES".