Fig. 5 - Wire Feeder Connector Assy. (MIG-35, DIGIMIG) - 19260
(MIG-31) - 19259
Fig. 4 - Basic MIG-41 Gun Assembly - P/N 19257
F-14-363-A
10/97
2M
Printed in U.S.A.
DRIVE ROLL CAP w/HARDWARE
- 19265
TORCH BODY - 19847
(Includes items marked
)
(2) O-RING - 19776
See Fig. 3
NUT, IDLER ARM - 19848
IDLER ARM - 19282
IDLER ROLL - 19266
TRIGGER SWITCH - 19279
SCREW - 19284
SCREW, M3X10 - 19290
WASHER - 19267
DRIVE ROLL SEAT - 19271
ADAPTOR SUPPORT (3 PCS) - 19285
ADAPTOR NUT - 18402
ADAPTOR BLOCK - 19283
FEMALE WIRE CONN. - 18407
O-RING - 18406
NUT - 18404
TRIGGER WIRE (27’ LG.) - 19297
MALE WIRE CONN. - 18408
COOLANT HOSE “IN”
(26’ LG.) - 19301 (BLUE)
PLUG (COOLANT “IN”) - 950615
Plug (950797) and socket (950798) on the Power
Control Assembly (19310) are polarized. If either
have to be replaced, mark leads and reconnect to
appropriate pins/sockets.
Not Shown
LINER (0.030”/0.035”,3/64 X 27’lg.) - 19304
(3/64” x 27’ lg.) - 19305
(1/16” X 27” lg.) - 19737
COLLET (LINER - 1/16” WIRE) - 19774
COLLET (LINER - .030—3/64” WIRE) - 19306
O-RING (LINER) - 19307
}
PLUG - 950797
MOTOR CONTROL WIRE
(27-1/2’lg.) - 19298
ADAPTOR INSULATOR - 19316
ADAPTOR BLOCK - 19315
GAS HOSE (Supplied w/19315)
Supplied
SUPPORT LINER - 19309 (w/19260)
SUPPORT LINER - 19308 (w/19259)
COOLANT “IN” HOSE ASSY. - 19089
COOLANT “OUT” HOSE ASSY. - 19090
ADAPTOR PLUG - 19320 (MIG-35)
- 19313 (MIG-31)
(2) FEMALE CONN. w/LEAD - 19317
POWER CABLE - 19339
SWITCHCORD - 19340
Includes PLUG - 2062336
OPTIONAL ACCY.: PLUG COVER - 2062337
SET SCREW - 19319
SET SCREW - 19318
POWER PLUG - 19314
SCREW - 18405
DRIVE ROLL (0.030”) - 19268
(0.035”) - 19269
(0.045”) - 19270
(1/16”) - 19736
GAS FITTING - 19275
CONDUIT FITTING - 19274
CABLE SUPPORT - 19775
(4) SCREW, M3X18 - 19292
(4) SCREW - 19293
HANDLE (2 PC) - 19278
SCREW, HANDLE - 19291
NUT - 19289
GEAR MOTOR - 19280
GAS HOSE (27’ lg.) - 19294
HOSE CLAMP - 19295
WIRE CONDUIT (25’ lg.) - 19296
POWER CABLE (25’ lg.) - 19300
SOCKET (COOLANT “OUT”) - 950614
included with
particular liner
•
Early version gun assemblies used cable support 19273 & clamp 19272.
COOLANT HOSE “OUT” (15” lg.) - 19302 (RED)
OUTER CABLE COVER (25’lg.) - 19299
(2) KNOB - 19287
(2) SPRING - 19286
(2) BALL - 19288
SCREW - 18405