ESAB CIGWELD COMET, Руководство по эксплуатации

Страница: 11 / 24

11
SECTION 2: INTRODUCTION
2.01 BOX CONTENTS
The Comet Platecutter Box comes complete with the components listed below. Ensure when unpacking the box that all
components are present.
1 x Comet Platecutter
1 x Operating Manual
1 x Torch Holder with Rack
1 x Torch
1 x Gas Distributor
1 x Twin Hose 600 mm
1 x Power Cord
1 x Nozzle Type 41 Size 8
2 x Rail 1.8 m
2 x Hose End Fittings
2 x Spanner
1 x Tip Cleaner
1 x Hex Key
2.02 GAS REQUIREMENTS
This Comet Platecutter is suitable for use with oxygen/acetylene gases only. Cylinders of these gases are available in
various sizes dependent upon your usage requirements. Your local gas distributor will be able to assist in obtaining the
suitable grades of gases and cylinder sizes required for this Platecutter.