ESAB Buddy Arc 145, Инструкция по эксплуатации

Страница: 10 / 20

5 OPERATION
0463 276 001 - 10 - © ESAB AB 2015
5 OPERATION
General safety regulations for handling the equipment can be found in the "SAFETY"
chapter of this manual. Read it through before you start using the equipment!
5.1 Connections
1. Indicating lamp, green, power supply ON 5. Connection (+) for return cable or welding
cable
2. Indicating lamp, yellow, overheating 6. Connection for mains cable
3. Knob for setting the welding current 7. Mains power supply switch 1/O
4. Connection (-) for return cable or welding
cable
5.2 Symbols
Power supply ON Overheating
5.3 Connection of welding and return cable
The power source has two outputs, a negative [-] terminal (4) and a positive [+] terminal (5),
for connecting welding and return cables.
The output to which the welding cable is connected depends on the type of electrode, please
refer to electrode packaging for information relating to the correct electrode polarity.