ESAB AristoMig U500, Инструкция по эксплуатации

Страница: 8 / 20

-- 8 --
bu15d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 3 . Read through before you start using the equipment!
6.1 Connections and control devices
1 Connection for cooling water from the TIG
torch -- RED
10 White indicating lamp -- Power supply ON
2 Connection with ELP* for cooling water to
the TIG torch -- BLUE
11 Orange indicating lamp -- Overheating
3 Cooling water filler 12 Fuse
4 Connection for welding current cable (+)
at MMA welding or for return cable at TIG
welding
13 Connection for control cable to the wire
feed unit or to the terminating resistor
5 Connection for remote control 14 Connection for gas hose
6 Connection for return cable (--) or for wel-
ding current cable at TIG welding
15 Connection for welding current to the wire
feed unit
7 Connection for start signal from the torch. 16 Connection for cooling water to the wire
feed unit -- BLUE
8 Connection for gas to the TIG torch 17 Connection for cooling water from the wire
feed unit -- RED
9 Main power supply switch, 0 / 1 / START
* ELP = ESAB Logic Pump, see point 6.5
GB