ESAB AristoMig 320, Инструкция по эксплуатации

Страница: 19 / 36

-- 19 --
bu18d1e
3 INTRODUCTION
The AristoMig 320 and AristoMig 450 power sources are intended for MMA (welding
with coated electrodes), MIG/MAG welding, TIG welding and carbon--arc gouging.
AristoMig is used in combination with the AristoPendant U8 control unit and/or the
AristoFeed 30--4 or AristoFeed 48--4 wire feed unit.
ESAB’s accessories for the product can be found on page 31 .
3.1 Equipment
AristoMig is supplied with terminating resistor, mains cable, guide pin, gas cylinder shelf,
return cable and instruction manual.
3.2 Settings
All settings are made using the control unit
AristoPendant U8 or wire feed unit with MMC.
Operation -- see separate instruction manuals.
4 TECHNICAL DATA
AristoMig 320/320w/U320w AristoMig 320/320w/U320w
Mains voltage 400V 3 ~ 50/60 Hz 230/400/500V 3 ~ 50Hz
208/230/460/475V 3
~
60 Hz
Maximum permissible load at
100% duty cycle
60% duty cycle
270A / 30.8V
320A / 32.8V
270A / 30.8V
320A / 32.8V
Setting range
MIG/MAG 15A/ 15V(8V)--320A/30V 30A/15V(8V)--320A/30V
MMA 16A / 20V -- 320A/32.8V 10A / 20V -- 320A /32.8V
TIG 4A / 10V -- 320A/22.7V 10A / 10V -- 320A / 22.7V
Open--circuit voltage
MIG/MAG 65 -- 80 V 65 -- 80 V
MMA 50 --60 V 50 --60 V
TIG 50 --60 V 50 --60 V
Open--circuit output
with water
180 -- 210 W
380 -- 470 W
180 -- 210 W
380 -- 470 W
Efficiency at maximum current
MIG/MAG
MMA
TIG
82%
84.5%
82%
82%
84.5%
84.5%
Power factor at maximum current
MIG/MAG
MMA
TIG
0.85
0.85
0.80
0.85
0.85
0.80
Enclosure class IP 23 IP 23
Weight
with cooling unit
96 kg
110 kg
143 kg
157 kg
Dimensions , l x w x h 910 x 642 x 835 mm 910 x 642 x 835 mm
Application class
GB