ESAB A2 Multitrac, Инструкция по эксплуатации

Страница: 56 / 78

9 TOOLS
0460 949 274
- 56 -
© ESAB AB 2015
9 TOOLS
Main menu → Tools
This menu contains the following sub-menus:
• Event handling, see “Event handling” , page 56.
• Export/Import, see “Export/Import” , page 59.
• File manager, see “File manager” , page 60.
• Edit setting limits, see “Setting limit editor” , page 63.
• Edit measure limits, see “Measure limits editor” , page 63.
• Production statistics, see “Production statistics” , page 65.
• Quality functions, see “Quality functions” , page 65.
• Calendar, see “Calendar” , page 67.
• User accounts, see “User accounts” , page 67.
• Unit information, see “Unit information” , page 69.
9.1 Event handling
Main menu → Tools → Event handling
Fault management codes are used to indicate that a fault has occurred in the welding
process. Indicated in the display via a pop-up menu and an exclamation mark
appears in
the upper right-hand corner of the display.
Note! disappears from the display as soon as you enter the event log menu.
The Event handling menu has got two sub-menus, Event log (see “Event log” , page 56)
and Active errors (see “Active errors” , page 57).
9.1.1 Event log
Main menu → Tools → Event handling → Event log
All errors that arise during the use of the welding equipment are documented as error
messages in the error log. Up to 99 error messages can be saved. If the error log becomes
full, i.e. if 99 error messages have been saved, the oldest message is automatically deleted
when the next fault occurs.