ESAB 0457 357 882, Инструкция по эксплуатации

Страница: 10 / 28

3 TECHNICAL DATA
0463 404 101 - 10 - © ESAB AB 2018
3 TECHNICAL DATA
Miggytrac™ B501 and Miggytrac™ B5001, from serial no. 1847 xxxx
Miggytrac™ B501 Miggytrac™ B5001
Battery voltage (lithium-ion) 18 V DC
External supply voltage –
20–50 V AC
24–70 V DC
Battery operating time 6–8 hours 4–6 hours
Motor type Stepper motor
Welding speed
10–130 cm/min
(4–51 in./min)
2–170 cm/min
(1–66 in./min)
Travel speed step welding –
250 cm/min
(99 in./min)
Length step welding –
1–99 cm
(0.1–19.9 in.)
Crater pause – 0–5.0 s
Backfill – 0–50 mm (0–2.0 in.)
Preheat – 0–5.0 s
Remote volt and wire feed speed – 10–95%
Mechanical adjustments:
Horizontal slide ±32 mm (±1.3 in.)
Vertical slide ±40 mm (±1.6 in.)
Guide wheel arms ±40 mm (±1.6 in.)
Maximum operating temperature:
Battery +60 °C (140 °F)
Carriage +80 °C (176 °F)
Drive wheels +150 °C (302 °F)
Horizontal tensile force:
Without magnets 12 kg (26 lb)
With magnets 25 kg (55 lb)
Vertical tensile force at 45° with magnet 11 kg (24 lb)
Maximum drive angle with magnet kit 45°
Dimensions (l×w×h)
310×290×250 mm
(12.2×11.4×9.84 in.)
310×290×340 mm
(12.2×11.4×13.4 in.)
Weight 12 kg (26 lb) 13 kg (29 lb)