IMPORTANT
As chapters of IEC 60364 norm:
1:
Install protectors against overloads on power supply.
2:
Sensor cables and computer signs can be together, however not in the same conduction; where there
power supply and load drive.
3:
Install suppresors (RC filters) in parallel to loads to increase the relays function.
Wiring diagram of suppresor in contactors
Wiring diagram of suppresor linking in loads
direct drive
Load
For direct activation the maximum
specified current should be taken
into consideration.
A1
A2
A1 and A2 are the
contactor coil.
Suppresor
Suppresor
ENVIRONMENTAL INFORMATION
Package:
The packages material are 100% recyclable. Just dispose it through specialized
recyclers.
Products:
The electro components of Full Gauge controllers can be recycled or reused if it is
disassembled for specialized companies.
Disposal:
Do not burn or throw in domestic garbage the controllers which have reached the end-of-
life. Observe the respectively law in your region concerning the environmental
responsible manner of dispose its devices. In case of any doubts, contact Full Gauge
controls for assistance.
