15
□ Motion
□ Velocity
□ Acceleration
□ Jerk
□ Steps/mm
□ Filament
□ E in mm3
□ Unload mm
□ Load mm
□ Store settings
□ Load settings
□ Restore failsafe
□ Initialize EEPROM
□ Print from SD
7. Special Function of Eryone Thinker SE
We choose TMC2208 as stepper motor driver and quite fans but powerful which
dramatically decreases the noise and improve the printing quality as well. The av-
erage operational noise is 49dBA, working aside the 3D printer is not only
a dream.
The base and gantry of this 3D printer have been pre-assembled, what you need
to do is put those two parts together and wire a few interfaces.
The printing volume is 300*300*400mm, with carefully-selected components, after
3 steps installation, the printer will be printing pretty well, almost no need to
calibrate.
Super quiet
Assembly finished within 10 minutes
Large Volume and high quality
Power failure resume feature: Built-in supercapacitor and circuit designing, the
mainboard will store the height value of Z-axis when the power off. When the pow
-
er system resume, the printer can resume the print.
Power failure protection
