Eryone Thinker S, Руководство пользователя

Страница: 21 / 24

7.6 Power failure protection
Power failure resume feature: Built-in supercapacitor and circuit
designing, the mainboard will store the height value of Z-axis when the
power off. When the power system resume, the printer can resume the
print
.
7.7
Compatible with auto-leveling sensors(Not included
sensor)
With pre-designed interface for BL-touch and proximity switch, update
Eryone Thinker S firmware to enable the auto-leveling function is easily.
8. FAQ-Common Assembly issues
8.1 X carriage is loose
If you find your X carriage is loose. You can use the wrench to tight the
eccentric nut this will remove wobble and slack in the X carriage.
8.2 Z axis stop moving or stick half way
1) Check if the stepper motor cable is loose
2) You need to check your wires at first. If it is ok, you can loossen the
brass nut screw a little, this will help it move correctly.
3) Add the lubricant oil to the T8 rod
20