Erwin Sattler Rotalis 10 Wood, Руководство пользователя

Страница: 75 / 108

21
Now you can push the watch with closed bracelet over the watch holder. For better handling
the watch holder can be compressed. In order to secure the watch, the watch holder will
expand to the width of the wristband.
Replace the watch holder in the housing of the winder.
Please make sure that the watches are always set at 12 o´clock position when
inserted.
They will return to this position after each winding interval.
Technical data: Rotalis 15
Case
Crystals
Winders
Drive
Ball bearings
Clock
Height: 88,5 cm (with extended panes 127 cm),
Width: 120 cm, Depths: 20 cm
Safety glass
15 precision watch winders, individually programmable via WIFI,
12 o’clock position
15 high-power motors
90 stainless steel precision ball bearings
Navis Quar
t
z
Nautical instruments Thermometer, Barometer
Fittings 12 manual-winding-watch cushions, behind the lower mirror flap
2 removable inserts, optional: Jewelry Holder, Pen & Bracelet
Holder, Watch Holder, Universal Storage Compartment
Power supply 110–230 V
If an individual adjustment to the res-
pective movement is to take place, this
can be done by using the integrated
software (SMART INTERFACE).
How to use the software is described in
chapter »Manual for the software
SMART INTERFACE«
see page 38.
The Navis Quartz and the nautical
instruments are described
at the pages
3 4 -37.
Neu Rotalis 14.06.22_Layout 1 14.06.22 11:59 Seite 75