Erskine Attachments 725FM, Руководство оператора

Страница: 21 / 44

21
OPERATING INSTRUCTIONS
Know your work area. Avoid
obstructions and debris.
1. Before starting the tractor engine, adjust the chute
to control snow discharge angle and distance. To
adjust: remove the pin from the bottom of the
deflector link, move the deflector to the desired
angle, and reinstall the pin through the chute and
deflector link.
NOTE: Snowblower will achieve maximum
casting distance with the deflector in the highest
position (as shown).
2. Skid shoes are used to control the cutting height.
To adjust the skid shoe height: raise the
snowblower off of the ground and block it in
position, remove the skid shoe lynch pins, adjust
the skid shoes up or down to the desired cutting
height by moving spacers to the top or bottom of
the skid shoe mount bushing, and reinstall the
lynch pins. Make sure both skid shoes are set to
the same height.
To avoid being crushed, never
work on raised attachment without using
additional support blocks or jack stands.
3.
With the operator in the operator’s position, check
to be sure all operating controls are in neutral and
start the engine.
Keep people away from tractor,
snowblower, and discharge when in use. This
attachment sends objects flying and has
rotating parts. Never direct discharge toward
people
– rocks and debris can be thrown.
4. With the engine idling, check the hydraulic remote
functions for the discharge chute rotator and
snowblower lift cylinders.
5. Rotate the chute toward a clear area.