SAFETY
Whenever you see this symbol, it means Attention!
Become Alert! Your Safety is involved.
Failure to obey warnings or instructions can cause
personal injury or death.
Operating instructions must be given to everyone before operating this machine and at least once a year
thereafter in accordance with OSHA regulations.
•
This attachment is designed for blowing snow
only.
NEVER
use this attachment for purposes
other than intended.
•
NEVER
modify equipment or add attachments
that are not approved by Erskine Attachments
LLC.
•
Remember,
YOU
are responsible for the safe
operation and maintenance of the equipment.
Most accidents can be prevented. Good safety
practices not only protect you, but also the
people around you.
General Safety Instructions
•
Read the operator’s manual for the “Skid Steer
Loader” to become totally familiar with the
controls and instruments. Know how to stop all
equipment operation in case of emergency.
•
Avoid the possibility of personal injury and/or
machine damage.
NEVER
exceed the maximum
recommended input power or speed
specifications for the attachment.
•
Check and be sure all operating controls are in
neutral before starting the engine.
5
•
Disengage hydraulic drive, lower the attachment
to rest flat on the skid shoes, stop engine, set
park brake, and wait for all motion to stop before
leaving the operator’s seat for any reason.
Wear Protective Equipment
•
Protective clothing and equipment should be
worn.
•
Wear clothing and equipment appropriate for the
job. Avoid loose fitting clothing.
•
Prolonged exposure to loud noise can cause
hearing impairment or hearing loss. Wear
suitable hearing protection such as earmuffs or
earplugs.
•
Operating equipment safely requires the full
attention of the operator. Avoid wearing radio
headphones while operating equipment.
Avoid High Pressure Fluids Hazard
•
Escaping fluid under pressure can penetrate the
skin causing serious injury.
•
Avoid the hazard by relieving the pressure
before disconnecting hydraulic lines.
•
Use a piece of paper or cardboard, NOT BODY
PARTS, to check for suspected leaks. Wear
protective gloves and safety glasses or goggles
when working with hydraulic systems.
•
If an accident occurs, see a doctor immediately.
Any fluid injected into the skin must be
surgically removed within a few hours or
gangrene may result.
WARNING: Before adjusting, or
servicing the unit, stop the engine
and relieve all hydraulic pressure by
opening the control valve.
•
Keep all shields, guards, and covers in place.
•
Stay clear of the attachment when machine is
running.
•
NEVER
make adjustments, lubricate, or perform
any service on the machine while it is in
operation.
•
NEVER
operate this attachment within 100 feet
(30m) of people, or pets.
•
NEVER
operate near embankments or terrain
that is so steep that rollover could occur.
•
NEVER
allow children or untrained persons to
operate.
•
DO NOT
permit riders on equipment.
•
Use adequate safety warning lights and devices
as required by local regulations.
•
Obey all local laws and regulations regarding
machine operation on public property.