Erskine Attachments 110X, Инструкция по безопасности и эксплуатации, Страница: 12 / 32

110X, 210X, 310X, 360X, 410X
Safety and operating instructions
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E. The CE symbol means that the machine is
EC-approved. See the EC Declaration of
Conformity which is delivered with the
machine for more information.
Noise level label
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
Labels on the accumulator
Transport
WARNING Falling breaker can cause
injuries
►
Place the hydraulic breaker in a safe position
where it
can’t fall over and cause damage.
Carefully check that the carrier is stable enough
when transporting or performing maintenance or
other kind of work on the hydraulic breaker. The
hydraulic breaker is delivered in a box. To lift out the
hydraulic breaker in a safe way, use the lifting eye.
Installation
Before installing the hydraulic breaker on the
carrier or operating it, read the operation manual
and safety instructions provided by the carrier
manufacturer. Follow all instructions.
The carrier must have the appropriate hydraulic
system for operation of the breaker.
If the carrier is too large for the hydraulic breaker it
may lead to broken insertion tools and increased
wear. See "Technical data" for choosing suitable
carrier.
The safety equipment in the hydraulic system must
be checked for quality (CE mark, etc.), suitability and
function ability by a professional or authorized
supervisor before use.
Hoses and connections
Read through the overhaul instructions carefully
before servicing or charging.
The accumulator must only be charged with
Nitrogen.
NOTICE Only certified personnel are allowed to
work with the accumulator.
WARNING Whipping hydraulic hose
Hydraulic hoses under pressure can whip
uncontrollably if screws loosen or are loosened. A
whipping hydraulic hose can cause severe injuries.
►
Depressurize the hydraulic system before
loosening the connection of a hydraulic hose.
►
Tighten the nuts on the connections of the
hydraulic hoses to the required torque.
Type of nipple: Quick Attach JIC standard nipple.
The nipple dimensions can be found in the Spare
parts list.
The quality of the hydraulic hoses should be 2SC
(according to EN 857) or better when connecting
the breaker to the carrier. If quick couplings are to
be used, were commend using the "Flat Face"
quick coupling. This type is sturdy and easy to
clean. The quick couplings pressure class must
agree with the carrier's working pressure.
Always clean the quick couplings before mounting
or dismounting. Always plug hoses and hose nipples
with tight and clean plugs when dismounting.
xxx
WA
dB