M
antenimiento_1
24.fm -
18/5/11
34
Installation Guide
MAINTENANCE AND DIAGNOSIS OF FAILURES
1
MAINTENANCE
Disconnect the device from the power supply before carrying out any maintenance operation.
1
Frequently check the installation in order to detect
any imbalance or sign of deterioration or wear. Do
not use the device if any repair or adjustment is
necessary.
2
Check that the operation and safety devices
(photocells or safety strips), as well as their
installation, have not suffered any damage from the
weather or external agents.
2
SPARE PARTS
If the device needs repairing, go to an
authorised assistance centre or manufacturer;
never try to repair it yourself.
Use only original spare parts.
3
FAILURE DIAGNOSIS
RECEIVER2
GND ANT
ANT1
OPEN/CLOSE
TIME
Diagnosis items
T.M.
Operation time adjustment
LRN
Radio code programming / receiving radio
code indicator
WTN
Shutter gate open indicator
PWR
Power supply indicator
OPN
Opening relay enabled
CLS
Closing relay enabled
ST1
Opening device (A.T.) indicator activated
ST2
Closing device (C.T.) indicator activated
PT1
Opening safety device contacts (SG.A) closed
PT2
Closing safety device contacts (SG.C) closed
F1
Main fuse (5x20):
CLEVER02: 2,5A (230V/ 50Hz);
CLEVER02M:
6,3
A (125V/ 60Hz)
F2
Electronic fuse (5x20): 500mA
SW1
Main switch
CLEVER02_EN.book Page 34 Wednesday, May 18, 2011 4:02 PM