Erreka AR220C, Руководство по установке

Страница: 35 / 64

Instalacion_
64
v0.0
.fm - 6/4/0
9
ARC electro-mechanical actuator
31
INSTALLATION
3
UNPACKING
1 Open the packages and remove the contents from
within.
}
Discard the packaging in an environmentally
friendly manner, using recycling containers.

Do not leave the packaging within the reach
of children or handicapped people, as it may
cause injury.
2 Check the content of the packages (see “Fig. 2
Content and spare parts” on page 29).

Should it be noticed that a piece is missing or
deteriorated, contact the nearest technical service.
4
ACTUATOR INSTALLATION
Assembly positions and levels

It is necessary to install an opening and closing stopper.
Fig. 3 Example of assembly position of the actuator
C (cm.) A (cm) B (º) D (cm)
45
0 mm
a
rm
16-20 0 90 16-20
65
0 mm
a
rm
20-22 110 20-35
22-35 120 22-35
16-20 5 90 16-20
22-25 110 22-35
25-35 120 25-35
16-20 10 90 16-20
23-25 110 23-35
28-35 120 28-35
16-20 15 90 16-20
25-30 110 25-35
30-35 120 30-35
16-20 20 90 16-20
26-35 110 27-35
- 120 34-40
16-20 25 90 16-20
- 110 28-35
- 120 36-50
- 30 90 16-20
- 110 30-35
- 120 40-45
- 35 90 16-20
- 110 32-35
- 40 90 16-20
- 50 90 16-20
- 60 90 16-20
450 mm arm

Level A and the required opening angle (B) determine level C
(see attached chart).
650 mm arm

Level A and the required opening angle (B) determine level D
(see attached chart).
ARC.book Page 31 Monday, April 6, 2009 10:17 AM