8
7: ACCESSORIES
You’ll need erotic accessories or electrodes that allow the ET312 to be connected to the
body. A wide variety of erotic electrodes are available and selection is a matter of gender
and personal preference. ErosTek or your dealer can assist you in choosing the best ones
for your interests.
Your ET312 comes with:
•
Universal AC adapter with plugs for US/Canada, EU and UK outlets
•
(2) Banana Plug Leadwire Cables
•
3.5Mm Stereo Audio Cable
•
High-Sensitivity Microphone
8: CONTROLS
The ET312 offers a wide variety of e-stim options yet is very easy to use. There are multiple
e-stim patterns or routines available. These are called “Modes.” You can further tailor each
mode to your tastes.
For normal operation, simply make the desired connections, make sure that output levels
for both channels, A and B, are at their minimum, turn the ET312 ON, choose a mode, and
gradually increase the output level. The
MultiAdjust
control can be used to easily fine-tune
the sensations.
Refer to the
Front Panel Diagram
on the next page for control locations and descriptions.
Power Switch
- The power switch is located just to the left of the connection jacks. Make
your connections and turn the level controls fully down before turning the ET -312 on. Push
the button in to turn the unit on, and push it again to turn it back off. Don’t forget and leave
the ET312B ON without it being powered by its AC adapter.
Allowing the battery to go
dead can cause permanent damage and reduce the operating time.
Replacement battery
modules are available from ErosTek.
Level A & Level B
- These adjust the output intensity for each channel. Fully
counterclockwise (to the left) is all the way down. The intensity level is shown on the LCD
from 00 to 99. It is normal to feel the output sometimes increase in small “steps.”
It is also
normal for the displayed level to skip a number with gradual adjustments.
MultiAdjust (MA)
- This “smart control“ adjusts the optimum parameters for most
modes. After you’ve selected a mode, and set the Level control(s), use the MA control to
fine tune the output for the desired effect or to provide added variety. In some modes, the
MA control may take a few moments to respond.
Accessories • Controls