ERONE is a trademark by ELPRO INNOTEK S.p.A.
Via Piave, 23 - I-31020 S.Pietro di Feletto (TV) - ITALY
Tel.: +39/0438/450879 - Fax.: +39/0438/455628
Toll-free number: 800.53.46.46
E-Mail: [email protected] - Web: www.erone.com
IS-RSC2ERUK Rev. 1 del 11.11.2003
4 - MEMORY ERASURE
2 - TRANSMITTER CODES MEMORIZATION
2A - Output “Red relay”
Keep “PR” pressed down until the Red led “LR” lights up; release “PR”;
the led “LR” remains lit.
Push then the transmitter key which has to be memorized, the led “LR” of
the receiver makes a flash and the relay “RR” activates for a while giving
the confirm of the successfully procedure.
Attention: If the led “LR” turns off before to activate the transmitter key it
is necessary to repeat the procedure.
2B - Output “Green relay”
Keep “PV” pressed down until the Green led “LV” lights up; release
“PV”; the led “LV” remains lit.
Push then the transmitter key which has to be memorized, the led “LV” of
the receiver makes a flash and the relay “RV” activates for a while
Keep “PR” pressed down until the Red led “LR” lights up; release “PR”;
the led “LR” remains lit.
Within 2 seconds push at the same time both the buttons PR” and
“PV”and keep them pressed down until 3 flashes of both the leds occur.
At this pont the memory is completed erased.
In case of memory full, if you try to memorize another transmitter
code, both the led red “LR” and green led “LV” will flash
simultaneously three times.
The first led activated remains lit for further 4 seconds.
The memory capacity is of 85 codes.
3 - MEMORY FULL
PR
PV
LV
LR
J1
J1
RV
RV
RR
RR
RR C
RR NO
RV C
RV NO
Alim. 0
ANT.
GND Ant.
n.c.
n.c.
12/24V ac/dc
ANT.
GND ANT.
1D - Layout and connections
giving the confirm of the successfully procedure.
Attention: If the led “LV” turns off before to activate the transmitter key it
is necessary to repeat the procedure.
The guarantee period of all Erone products is 24 months,
beginning from the manufacturer date. During this period, if
the product does not work correctly, due to a defective
component, the product will be repaired or substituted at the
discretion of the producer. The guarantee does not cover the
plastic container integrity. After-sale service is supplied at the
producer's factory.
GUARANTEE
