ERONE - SLOT-IN CARD RECEIVER
1A - Introduction
The slot-in card receiver ERONE type SEL2641R433-S2 is a
superheterodyne receiver operating at 433.92 Mhz.
It is a component of the radiocontrol ERONE 433.
It can be used with the transmitters ERONE, Series ERONE 024A Rolling
code and ERONE MINI . The outputs are carried out by means of a 10
ways MOLEX connector on which are available 2 pure contacts of the
SEL2641R433-S2
1B - Technical specifications
Receiver type:
Superheterodyne.
Demodulation:
AM/ASK.
Operating frequency:
433.92 MHz.
Local oscillator frequency:
6,6128 MHz.
Intermediate frequency:
10,7 MHz.
Sensitivity ( for good signal ):
-117 dBm.
Input impedance:
50 Ohm.
Power supply :
12 or 2ac/dc.
Current consuption:
8 mA
Relays number:
2 ( contacts NO).
Commutable max power:
24W or 24VA .
Max codes number:
85.
Operating temperature:
-20 ÷ + 70 °C.
Codes memory type:
EEPROM
Dimensions:
52 x 46 x 19 mm.
Weight:
24 gr.
J1 = CLOSED
Power. 12 Vac/dc
J1=OPEN
Power. 24 Vac/dc
1C - Power selection
two relays and the three power connections, so it can be connected only
to a perfectly compatible device.
The receiver makes it possible a multiple code management ( up to 85
different transmitter codes, thank to the internal EEPROM.
The transmitter code memorization can be performed with 2 push-
buttons. A separated antenna input connector is available on the card.
USABLE TRANSMITTERS
!
Erone 024A Type. S2TR2641E2: 2 keys transmitter;
!
Erone 024A Type. S2TR2641E4: 4 keys transmitter;
!
Erone 433MINI Type. SETR2641AM2 :2 keys mini transmitter;
CONTENTS
1A - Introduction
1B - Technical specifications
1C - Power selection
1D - Layout and connections
1 - PRODUCT INTRODUCTION
2 - TRANSMITTER CODES MEMORIZATION
3 - MEMORY FULL
4 - MEMORY ERASURE
Thank you for choosing a product Erone.You are recommended to
read carefully this manual before installing the product.
M
A
N
U
A
L
IN
ST
A
LL
ATI
O
N
T H E S M A R T L I V I N G
