?
Misure di sicurezza
Per un perfetto funzionamento dell’apparecchio, si prega
di leggere interamente questo manuale e seguire
attentamente le indicazioni ivi descritte, in quanto l’uso
improprio può danneggiare l’apparecchio.
4 viti per fissaggio del coperchio
4 cover fixing screws
Coperchio
Cover
Scatola con ricevitore
Box with receiver
Antenna
Aerial
4 viti per fissaggio della scatola
4 enclosure fixing screws
Fig. 1a
Passacavi
Wire leads
4 tasselli
Plugs
Ricevitore / Receiver
2
Avvertenze / Remarks
Plexiglas
?
Safety remarks
For the best operation of this device please read all this
manual and follow carefully the indications since an
improper use can damage the device.
THE SMART LIVING
Dichiarazione di Conformità
:
Il costruttore Elpro Innotek Spa dichiara che il
radioprogrammatore mod. SEL2641R433-C4R, è
conforme alle Direttive Europee 73/23/CEE, 89/336/CEE
e 99/05/CE.
Declaration of Conformity
:
Elpro Innotek Spa, as manufacturer, declares that the
following appliances : SEL2641R433-C4R, fullfills the
requirements of the European Directives 73/23/CEE,
89/336/CEE and 99/05/CE.
LD1 lits
release
P1
LD3 and LD4
flash three times
simultaneously.
LD1
switches off
7.2 Memory full erasure
Keep the push button P1 pushed for 2 sec. until LD1 switches on. Release and push P1 again until LD3 and LD4 flash
three times simultaneously.
Keep the push button P1
pushed for 2 sec. until LD1
switches on
Push P1 again until LD1
switches off
!
ATTENTION: At the end of the procedure all data of the memory are deleted.
Fig. 15
8 - MODE PULSE/ STEP
Each relay can be set in pulse or step mode according to the set-up of the dip-switch S1 as shown on the following
tab. 2. In step ( or bistable ) mode the led corresponding to the relay activated blinks.
With the following procedure it’s possible to calculate the number of transmitters memorized.
The display is carried out by the led LD3 ( Red) and LD4 ( Green).
Push P1 and verify that LD1 switches on. Keep on pushed P1 until LD1 switches off and than release it.
At this point starts a sequence of flashes of the 2 leds LD3 (RED) ed LD4 (GREEN)
The sequence is the binary expression of the transmitter keys memorized.
The final number can be calculated making reference to the following table:
9 - DISPLAY OF THE MEMORY SPACE
Led on
1°
2°
3°
4°
5°
6°
7°
Green led value
1
2
4
8
16
32
64
Red led value
0
0
0
0
0
0
0
Tab.3
Example 4
:
Sequence :
LR, LR, LV, LV, LR, LR, LR.
Final number:
0 + 0 + 4 + 8 + 0 + 0 + 0 = 12
Therefore in the memory are memorized 12 transmitter keys.
ON
OFF
LD1 LD2 LD3
LD4
DIP-SWITCH S1
RELAY1
RELAY2
RELAY3
RELAY4
ON
OFF
BISTABLE
BISTABLE
BISTABLE
BISTABLE
PULSE
PULSE
PULSE
PULSE
Tab.2
15
RED
GREEN
THE SMART LIVING
