PIR-018
PASSIVE INFRARED DETECTOR
2824-00005 Page 7 of 10
•
The detection pattern and frequency response of the
PIR-018
has been optimised for the detection of human size targets
crossing the field of view in an upright position at speeds in the range of 0.2 … 5.0 m/s.
•
Detection of slow moving targets at long range may become uncertain under weak contrast conditions. It is strongly
recommended to limit the zone length to less than the nominal range when human targets moving at the minimum
specified speed need to be detected with high probability.
•
Animals or crawling people may or may not be detected depending on their size, speed, contrast and distance from the
PIR-018
.
It is therefore strongly recommended to combine the PIR-018 with an alarm verification such as CCTV or a second system
using other physical means of detection (e.g. VMD).
Any liability for direct or indirect damage resulting from the use of the PIR-018 as a detection device is explicitly disclaimed.
The information in this product manual is based on testing of samples taken at random from production and believed to be
representative, E&OE.
Annex 1:
Connector Board and Terminal Block
Tamper Switch
LED
Test Socket
Detector Settings
Day / Night
Control Inputs
Day
Night
Test
Detector
Function
LED
Night
ON
Walk test
indication
LED enable
Night
OFF
Memory set
enable
LED disable
Day
OFF
If memory
was set
LED flashes 2 Hz
Day
ON
Walk test
indication
LED enable
Night
ON
X
Memory reset
LED stop flashing
B
A
Cover switch
Day / Night
Not used
Com
NC
Open collector output
Test
- (GND)
Supply voltage
+
10.5 ... 26.5V
DC
RS485
RS485
1
2
3
4
5
6
7
8
10
11
12
9
27R
* Relay shown in energised (non-alarm) condition
+5V
10k
+5V
10k
*
Day / Night
8
Night:
Input open
Day:
Input pulled to (-)
Test
3
OFF:
Input open
ON:
Input pulled to (-)
