Note that the tiny protrusion on the
dome cover must align with one of
the four holes on the dome body.
STEP 5
Assemble the dome cover to the
dome body by pressing the cover
gently downward to the dome body
with two hands on the side of the
cover.
DO NOT press the cover as shown
in the figure; this might cause
damage to the dome body.
STEP 6
Screw the dome cover and body
together.
1.4.2: Dome Setups
Before connecting the speed dome camera to other devices of CCTV system, please complete the
speed dome ID and communication switch settings. These switches are located on the bottom of the
speed dome camera (refer to section 1.2 Physical Description).
