ERNITEC EDNS V3000 Series, Руководство пользователя

Страница: 85 / 124

84
Ernitec EDNS V3000 series – user manual
www.ernitec.com
V 2.2.082012
4.5.3 RS485 Setup
The DVR controls the domes via RS-485 communication
protocol. The RS-485 parameters in the DVR must be set to the
same parameters set in dome camera.
Users are allowed to change the RS-485 settings of the DVR.
Select <System Setup> in Main menu, then select <RS485
Setup> from the System Setup menu and press ENTER. The
following menu is displayed.
RS485 Setup
Unit ID
Baud Rate
Bits
Stop
Parity 224
9600
8
1
None
The ID number must match the ID address set by the dome. The
Unit ID is in the range of 1 to 255. Note that there cannot be any
two devices on the same bus given the same ID address, or a
conflict may occur.
NOTE: The settings become effective after saving the
changes and exiting from the menu.
4.5.4 Dome Controlling Buttons
After pressed DOME to enter Dome Control mode, a dome
control panel will be displayed. The controlling buttons are: Iris
Close/Open, Focus Far/Near, Zoom Out/In, Preset, Live, Pan/Tilt
Speed, Direction buttons, and Auto Focus. The functions are
described as below.
Iris Close
Click on it to close the Iris on the dome camera.
Iris Open
Click on it to open the Iris on the dome camera.