Use and maintenance manual
Automatic V-guide notcher
Model: VG-22
____________________________________________________________________________________________________________________
P a g . 8
The STOP button is used to halt the process.
NOTE:
If the machine does not start, check the front door is well closed and the emergency stop is not
locked.
-
Matrix change:
WARNING: To perform a matrix change, it is essential to lock the emergency
stop and cut off the compressed air supply.
The guide pulley must be adjusted to the profile height for each profile type.
The pulley chosen is then put in place and the axle retightened with the bolt.
The matrix is then released by removing the 2 metric 8mm bolts, removing it cleanly outward with the
two knurled controls.
