Use and maintenance manual
Longitudinal profile welding
Model: LRW-130
_______________________________________________________________________________________________________________________
P a g . 7
Once the belt is placed in position, close the frame using the arm (
C
) to prevent any movement or
deformation caused by the pressure of the pulleys:
Start the Leister welder by pressing the black wheel located on the rear and adjust the
temperature rotating this wheel
NOTE: For perfect welding, the welder should be pre-heated until the temperature digits
will be fixed.
Introduce one end of the profile into the rear of the machine until completing one turn of the
welding pulley as shown in the photo:
Lower the pulleys using the drive system located on the front of the welding carriage so that they
press the belt and are driven by turning the control knob (
P
):
